The MakerHive

 

PPC Black - HDPE

PPC Black - HDPE Image
Detail Image
Detail Image
Detail Image

Double shelf Pressure Pot Caddy, HDPE material
No more spills sticking to your plates!

Support your blank mold to load and unload your Pressure Pot with ease.

Fits most standard size pressure pots, 9" diameter x 8" tall inside.
Fits Harbor Freight Pressure Pot.

Remove the shelves to hold tall molds and easily add a shelf to hold several small molds.

Designed for the Vertical Casting System using 0.8" x 7" HDPE or 3/4" PVC tubes (not provided).
Note picture shows 16 holes total. Latest design will only have 12 holes total. This is to reduce the amount of heat build up inside the Pressure pot during curing.

Easy assembly, only 4 screws - 4-40 Stainless Steel screws and nuts provided.
Note: The parts come with paper masking on them. Please remove the masking before assembly.
The Laser cutting process will leave a melted edge, adhering the paper mask to the HDPE. Use a small plastic
scraper to remove and the lift the edges of the paper mask.

Use Denatured Alcohol for easy clean up.

You can order blank (no holes) shelves instead of the VCS ones, or you can add 2 blank shelves in addition to.

Assembly Video (video show the single shelf PPC, but assembly is the same.)
I suggest assembly with the smooth side up and use the shelves with the smooth side up so any spilled epoxy will peel off easily.

Dimensions can be found here.

Contents:
2 - Side walls
1 - top handle'
2 - shelf
1 - base
2 - #4-40 Pan head, for attaching handle
2 - #4-40 flat head, for attaching base
4 - #4-40 square nuts




Your Price:$38.00
Weight:2.000 lbs